line
Products catalog Power cables Power cable AVVG, AVVG-P (АВВГ, АВВГ-П)
Power cable AVVGng, AVVG-Png (АВВГнг, АВВГ-Пнг)

Power cable AVVG, AVVG-P (АВВГ, АВВГ-П)
View Full-Size Image


Power cable AVVG, AVVG-P (АВВГ, АВВГ-П)

Power cable with aluminum core in polyvinyl chloride (PVC) insulation, and sheath from PVC plasticate

 

AVVG is intended for electric energy transmission and distribution in stationary equipment (between introductory and distributing boards or boxes) at nominal alternated voltage 0,66 kV and 1 kV and frequency of 50 Hz. The cable is intended for laying in ground, in cable ducts, in production areas and also for outdoor laying where is strong need in protection against mechanical damage without significant tension. Foreign equivalent of the cable can be found here.

 

Quality is controlled according to:

GOST 16442-80, DSTU 4809:2007.

 

Structure :

  • 1. Core – aluminum, round or sector form with cross-sectional area from 2,5 mm² - 240 mm², with the cross-section more than 25 mm² – multiwire;
  • 2. Insulation - PVC insulated plasticate;
  • 3. Sheath - PVC plasticate;
  • 4. Quantity of cores - one insulated or stranded from 2-5 cores.

 

Specifications:

  • operating temperature from -50 ºС up to +50 ºС;
  • maximum permissible reheat temperature of cores during operation +70 ºС;
  • maximum permissible reheat temperature of cores in malfunction +80 ºС (duration of work is not more than 8 hours per day and 1000 hours for the whole period of exploitation);
  • maximum temperature at short circuit – +160 ºС;
  • installation and laying of cables without the preheating realizes with the temperature not lower than -15°С;
  • minimum bending radius by cable laying:
  • - 10 cable diameters for single-core cables,
  • - 7,5 cable diameters for multicore cables;
  • service life – not more than 30 years.

.